The world of barbies has its own laws, according to which she must be the owner of a chic wardrobe, which will certainly be demonstrated to the same fashionistas-girlfriends. If you wish, you can sew a gorgeous dress yourself, which will become the pride of your child.
Instructions
Step 1
First of all, you need to take chiffon, which has dark blue padding for the dress and thin gold brocade, which is intended for one of the lower layers of the skirt, collar and belt, as well as a blue Velcro fastener, the length of which is 5 cm and the width is 0.5 cm …
Step 2
To sew a brocade lower skirt, make a pattern for a strip that is 30 cm long and 11 cm wide. Also cut out another strip 100 cm long and 5 cm wide. Fold one of the cuts of that strip that is 100 cm long twice 0.5 cm on the wrong side and sew, then take the upper cut of this strip and start overcasting with small folds until you get a length of 30 cm (cut off the rest). To the cut, which is located on a strip 30 cm long, sew in the frill that is with folds. The upper cut of a 30-centimeter strip is swept with folds until a 13-centimeter length is obtained. The side cuts of both frills must be bent to the wrong side twice 0.5 cm, and then stitched.
Step 3
The dress is sewn in accordance with the size of the doll, which are indicated in the diagram. First, a sketch of the skirt is built, which is equal to the size of the Barbie. Then the piece of paper must be cut out and applied from the inside out. Next, take the chalk and trace the outline of the sun skirt. Cut the part along the line, along the line of this cut and along the line of the lower cut, you need to unscrew the material to the wrong side by a width of 0.5 cm, iron it with an iron and sew. The element of the upper skirt is superimposed on the front side of the lower skirt, then we need to sew both parts along the upper cut and lower it a little to the length of the lower skirt.
Step 4
From the blue material, you need to cut out two elements of the sleeves, one part of the front with a fold and two elements of the back, while leaving a 1 cm allowance along the cuts of the back and 0.5 cm along the remaining cuts.
Step 5
It is necessary to cut out 4 collar elements from brocade with allowances of 0.5 cm and a strip 60 cm long, and 4 cm wide for sewing a belt on a dress. The darts are sewn together on all sides. Those allowances, which are intended for hemming the sleeves, are turned to the wrong side and sewn.
Step 6
Sleeves are sewn in after the side seams. Then turn off the allowances that fall on the middle sections of the back and sweep. Further, the details of the bodice and skirts are folded with the front sides, the cuts in the waist area are grinded and the edges of the bodice and the back cuts of the skirts are combined. The strip, which consists of brocade, should be swept along the contour line, while the fabric should be folded 0.3 cm wide and wrapped around the waist several times. The finishing element is a bow, which is tied at the back.
