How To Sew A Jacket For A Girl

Table of contents:

How To Sew A Jacket For A Girl
How To Sew A Jacket For A Girl

Video: How To Sew A Jacket For A Girl

Video: How To Sew A Jacket For A Girl
Video: How to sew a Blazer Jacket // Shawl Collar Jacket // DIY// How to cut and sew a blazer jacket 2024, December
Anonim

A jacket made of natural woolen fabric with a double zipper and stick buttons will keep any girl warm and comfortable. Also, little fashionistas will not give up the fur trim on the hood, which can be easily fastened.

How to sew a jacket for a girl
How to sew a jacket for a girl

Necessary

Felted woolen fabric (loden), faux leather patch, lining fabric patch, woolen tape, edging tape, long pile faux fur strip with stitching tape, 2 cm wide contact tape, openable zipper, 3 stick buttons

Instructions

Step 1

Cut out two shelves from woolen fabric, two strips of shelves, one back detail, sleeves, middle and two sides of the hood, two burlap pockets from woolen and lining fabric. Leave 1, 5 cm for allowances.

Step 2

Sew the fastener strips to the shelves. Then stitch the shelves along the seams at a distance of 5 mm. Sew welt pockets with set-in ends.

Step 3

Sew on the sides and sew on the shoulder seams.

Step 4

Cut off the allowances along the bottom of the shelves, backrest, front cuts of the slats, and the neck cut. Tape around all sections of the jacket, stitching from the front side.

Step 5

Sew the side pieces to the middle of the hood. Stitch off the middle 5 mm. Cut the slit allowance and tape over with tape. Sew the hood into the neckline.

Step 6

Cut off the hem of the sleeves. Trim the sections with tape. Sew in the sleeves, seated on the rim.

Step 7

Place the trim tape over the zipper from the back. Pin at a distance of 5 mm from the teeth. Stitch to edge. Sew the zipper over the piping stitching.

Step 8

For the faux leather clasp, cut out three squares and three strips 18 cm long and 1.5 cm wide. Fold each in half lengthwise, inside out. Sew along the cuts. Make loops from these strips and sew them to the front. Sew leather squares on top of the sewn-on ends of the stripes. Sew on the buttons.

Step 9

Tuck the ends of the fur strip 1 cm and sew by hand with a velvet stitch. Place the hooks from the contact tape under the edging and sew them into the seams of the tape on the front side of the fur strip. Wrap a fur strip around the cutout of the hood and attach the hem using pieces of contact tape.

Recommended: