The clutch on the handle of a baby carriage is a useful and convenient part. She will warm her mother's hands in frosty and windy weather, while you do not have to endlessly put on and take off mittens in order to fix something on the child.
Necessary
Raincoat fabric, insulation, sewing machine, sewing accessories
Instructions
Step 1
Couplings are separate and fused. The first option is suitable for a stroller with two handles, and a fused sleeve is an excellent find for baby transport with one handle. Take a waterproof fabric - raincoat fabric or eco-leather and insulation. They can be synthetic winterizer, feather-down, wool, fur. An old fur jacket will make a great muff.
Step 2
Cut out two squares of raincoat fabric and fur with sides 50 cm x 50 cm. You can cut according to your parameters, starting from the length of the handle and the size of the hand. Insulate the faux fur with padding polyester by cutting out the appropriate square. Attach it to the flesh and stitch with a straight stitch around the perimeter, backing from the edge by 0.5 cm. Use the needle for leather. Sew a patch pocket to the top part on the front side for all the necessary little things. Fold the workpieces with the right sides inward, sew from the sides, leaving the edges unsewn. Unscrew the clutch, bend the edge of the fur to the front in the form of an edge and sew it to the finishing fabric by hand with a blind seam.
Step 3
Draw a horizontal center line from the inside of the coupling, measure and set aside from it on both sides the radius of the handle circle, sew Velcro strips at this distance so that the coupling is tightly fixed and does not creep. Buckle the edges and center by dividing the sleeve into two mittens. The fastener can be any: buttons, buttons, Velcro.
Step 4
Feather down can be used instead of fur for the inner warm layer. Sew a 55 cm x 55 cm napert from teak, lay vertical stitches along it at a distance of 10 cm, fill in the resulting cells with feather raw materials. Sew the workpiece horizontally, the fluff will not come loose in the cells, sew fleece to one of the sides. Cut out a piece of leather (leatherette) and grind the inner and outer layers so that the napkin with a feather is between the leather and the fleece, leave a small area unstitched in the middle, turn the product through it.
Step 5
Sew the strap, insert it into the unsewn hole, sew. Sew on the Velcro - one on the strap, the other on the sleeve. Trim the detail around the perimeter with contrasting tape or add decorative stitches. Sew "drawstrings" along the edges, insert elastic bands into them. Optionally set on the sides and center of the snap fastener. The warm stylish clutch is ready.
