How To Build A Children's Slide

Table of contents:

How To Build A Children's Slide
How To Build A Children's Slide

Video: How To Build A Children's Slide

Video: How To Build A Children's Slide
Video: DIY Backyard Playground out of lumber 2024, December
Anonim

It's easy to build a snow slide that is safe for your child. The main thing is to follow the suggested safety tips and tricks. This way you can avoid unwanted injuries and have fun with your kids.

How to build a children's slide
How to build a children's slide

It is necessary

  • - shovel;
  • - water;
  • - snow.

Instructions

Step 1

Before starting the construction of the slide, decide on the age of the children for whom it is intended. Its height will depend on this. For example, for very young children, you should not build a snow slide higher than 1 meter. So you will protect the child in the event of a fall from various kinds of injuries. The optimal height of the snow slide for children of different ages is 2 meters.

Step 2

Determine the location of the snow slide. Please note: it should not be near the roadway. The playground will be an excellent location for the snow slide. Try to build it on a vacant lot so that there are no other buildings, fences or barriers nearby.

Step 3

To build a slide, you need a lot of snow. Erect the building at an inclination of 40-45 degrees. To do this, use a shovel to cut out the snow bricks and lay them in the shape of the future slide. Start with the bottom layer, carefully laying out the base. Then tamp it down with a shovel and flatten it. Now move on to the next layer, making it a little shorter than the previous one. Thus, upon completion of the construction, you will have a descent from one edge, which must be leveled, and from the other, a ladder for climbing.

Step 4

Stick the sides along the edge of the slide. Make the steps smoother. The base of the snow slide for children is ready.

Step 5

To make the slide slippery, fill it with water. To do this, spread a fabric (old sheet, curtain) on the part where the children will roll. Pour enough water onto the drain. After the fabric is completely wet, remove it.

Step 6

Check the surface of the slide. If you notice any bumps or potholes, level them out. Fill the slide again. Repeat the procedure until you achieve an acceptable surface.

Step 7

To complete the construction of the slide, leave it to freeze overnight. Check its readiness in the morning. If the slide is in order, call the kids.

Recommended: